The Yamaha A-S3000 review includes a detailed analysis of an entirely new audio amplification model developed by the popular Yamaha. The model was created and designed with a detailed analysis of all modern sound trends and technologies, and thanks to that, it was able to accommodate the best ideas of the company's specialists. The Yamaha A-S3000 audio signal amplifier is designed in such a way that each board, which is present in this model, was created on the principle of "floating design".
All power and exquisite technique of sound reproduction are reproduced in this model in full, without the slightest omissions. As a result, the sound signal is as pure as possible, expressive and without any noise. The output power is in the range of 2 x 120 (8 ohms) / 2 x 150 (6 ohms) / 2 x 200 (4 ohms) / 2 x 300 (2 ohm) watts, the damping factor is 250, the frequency range is 5 Hz and up to 100 kHz ( 0 decibels / -3 decibels), the signal-to-noise ratio is 103 decibels, the input sensitivity is equal to 200 mV / 47 kΩ.
The basis of the model design was a modern, innovative technology of a potential-free symmetrical power amplifier for audio signals. This technology consists in removing the sound amplifier, making it possible to eliminate the negative phenomena of any deviations in voltage, with the use of this technology there are no obstacles to the ground bus. The model provides users with a useful volume control, which allows users to smoothly adjust the level of the sound signal. The amplifier itself is equipped with an effective timbre by the low and high-frequency unit and a special regulator that changes the balance of the left and right channels.
Design of the model is modern and stylish. Controls are visually accessible to user locations. The design of the model was designed in such a way that the internal units that use the amplifier and the power amplifier were placed individually so that the engineers of the company received a significant reduction in the third-party noise that may appear in the audio recording. The model provides users with convenient direction indicators, thanks to which, users can always adjust the dynamics of the music composition being played. The electronic volume control provides users with the optimal level of output sound, the 6 mm thick top panel is designed and manufactured from aluminum, making the model resistant to various physical damage, including scratches and stains. The front panel of the Yamaha A-S3000 features controls that are visually accessible to users and are easy to manage. The exterior of the model is sophisticated, at the same time it is modern and stylish. For more comfortable control of the model, a remote control is added to the kit. One can definitely say that the A-S3000 amplifier has a modern look, provides users with a clean, high-quality and natural sound. The remote provides you not only the ability to adjust the volume and switch the inputs on the amplifier A-S3000, but it can also be used effectively to control the CD-S3000 CD-player.