A / V-receiver is not something new, but the novelty is the fact that A / V-receivers now receive intelligent functions, improve connectivity and other functions for money. Yamaha RX-V485BL specs aren’t an exception. Read Yamaha RX-V485BL review to see what are they.
So, the main “combat capabilities” of the Yamaha RX-V485 AV receiver are as follows. With a weight of 7.8 kg and a 5.1-channel amplifier on board, it can provide power when loading one channel at 165 W (at 8 Ohms) or 115 W (6 Ohms). With the simultaneous operation of two channels, the power will be 2 x 80 W (6 Ohms). The device, judging by the specifications, will cope not only with movie tracks, but will also be able to demonstrate decent Hi-Fi sound in stereo. One of the most important distinguishing features of the Yamaha RX-V485 is the updated CINEMA DSP 3D processor.
A/V receivers are normally somewhat bulky black boxes, and the Yamaha RX-V485 is no exception to that rule but, as far as bulky black boxes go, it certainly doesn’t look bad. The unit comes in at around 17-inches wide, almost 7-inches tall, and 13-inches deep. That’s a pretty standard size for A/V receivers like this, though it does seem to be a little shorter than some others, which is a nice touch.
The Yamaha RX-V485 is equipped with only four HDMI inputs and one output. This means that if in the future the number of signal sources with such an interface in your home theater increases up to five, an additional external HDMI-selector will be required. In addition, the Yamaha RX-V485 has a 5.1 configuration, that is, there are no Dolby Atmos or DTS: X surround decoders. If you need them, then choose the model RX-V585 or RX-V685. These devices also have a large number of inputs and a higher output power.
Yamaha RX-V485 AV Receiver does not cause any problems with connection and setup. The operation of the on-screen menus is impeccably ergonomic, and the operation of the YPAO module traditionally causes applause.