Popular receiver comparisons 2024 - page 2

In the Denon AVR-X3600H vs Onkyo TX-RZ740 comparison we see two 9.2-channelled devices. Their RMS is 105/8 and 100/8 W/Ohm respectively. The device received eight HDMI inputs (one on the front panel) supporting 4K Ultra HD / 60 Hz, HDCP protocol version 2.3 and HDR video standards HDR10 / Dolby Vision / HLG. There is sup...

To compare Sony STR-DN1080 vs Onkyo TX-NR626 let’s remember that both models have 7.2 channels. Their RMS is 120/6 and 160/6 W/Ohm. On the rear panel there are as many as 6 HDMI inputs for connecting devices and 2 HDMI outputs for outputting images to a TV, monitor or projector. Although each HDMI input is signed, ac...

The Marantz SR6014 is equipped with eight HDMI inputs (one located on the front panel) and three outputs, supporting 4K / HDR10 / Dolby Vision video and HDCP 2.3. The AV receiver also has a full range of digital and analog connections, including for a turntable. Also in the Marantz SR6014 there is a full ...

Comparing Yamaha R-N803BL vs Denon DRA-800H we can notice their similarities. Both are 2.0-channelled and have RMS of 100W at 8 Ohms. The receiver is equipped with an ESS Saber DAC, which is ready to process audio at 24 bit / 192 kHz PCM and DSD up to 5.6 MHz. For owners of turntables, a phono input is provided, for owners...

The Denon AVR-X3600H AV receiver with nine discrete amplifiers on board is capable of decoding DTS:X and Dolby Atmos object-oriented 3D sound formats in the maximum possible 7.2.2-channel configuration or in 7.2.4-channel using an additional stereo power. Available in DTS Virtual:X format and Dolby Atmos Height Virtual...

Denon AVR-X1600H is equipped with six HDMI inputs and an output with support for the latest HDCP2.3 standard. The device can not only carry out video switching with the parameters 4K / 60 Hz, Dolby Vision, HDR10 and HGL, but also supports eARC technology, which allows you to transfer sound in 3D formats. Also, thanks t...

Comparing Denon AVR-X1600H vs Pioneer VSX-933 we can see that both have 7.2 channels and 80/8 W/Ohm RMS. Denon AVR-X1600H has HEOS technology, which allows you to play music from network devices and on-line services, as well as include the device in a proprietary multi-room system. In it, in particular, it will be poss...

The RX-V685 supports just about any format you can think of (MP3 / WMA / MPEG-4 AAC). It also supports 4K Ultra HD, HDR (high dynamic range) video including Dolby Vision and Hybrid Log-Gamma, and of course Dolby Atmos and DTS:X. Music is presented with the same character – clean and clear, detailed and defined (e...

The receiver is calibrated to the acoustic properties of the room automatically, the YPAO proprietary system is responsible for this, which optimizes the sound based on measurements using a standard measuring microphone. Yamaha RX-V685 is equipped with network technologies (DLNA, Airplay) for working with multimedia cont...

The device is equipped with a 15.2-channel audio output made on RCA and XLR connectors, which provides high flexibility of connection, and also (when using balanced connection) can drastically reduce the level of interference with long connecting cables. The surround sound processor in the Marantz AV8805 supports all exi...

Comparing Denon DRA-800H vs Marantz NR1200 we can see that these are two-channelled gadgets. Their RMS is 100/8 and 75/8 W/Ohm. A transformer is installed in the power supply, for the winding of which a wire made of OFC copper is used. The receiver's circuits are symmetrical in design, guarantee the shortest signal paths and...

These models are quite similar. Their stereo power is almost identical: 105/8 and 100/8 W/Ohm respectively. The channel quantity is 9.2 vs 7.2. The Denon AVR-X3600H AV receiver with nine discrete amplifiers on board is capable of decoding DTS:X and Dolby Atmos object-oriented 3D sound formats in the maximum possible 7.2....

Both devices have 7.2 channel configuration. However, Pioneer has a bit more stereo power: 165/6 vs 135/6 W/Ohm. The receiver’s network functionality is implemented in its entirety: it can work as a DAR (digital audio renderer), that is, a passive playback device that receives streams from a mobile application or aud...

Compared models have identical figures concerning amplifier abilities. Both have 7.2 channels and 120W at 6 Ohms. Denon AVR-X1600H is equipped with six HDMI inputs and an output with support for the latest HDCP2.3 standard. The device can not only carry out video switching with the parameters 4K / 60 Hz, Dolby Vision, ...

Here we have 9.2 and 7.2 channels relatively. The stereo power is 180W at 6 Ohms for Onkyo and 100W at 8 Ohms for Marantz. The model received an aluminum front panel with a cover under which there are control buttons, an HDMI input, a headphone jack and a microphone input. At the rear of the Onkyo TX-RZ830 are 6 HDMI inputs ...

Considering amplifier abilities of these two I can say that they both have 7.2-channel configuration. The stereo power is 160/8 for Onkyo, his foe has 100/8 W/Ohm. Having a 32-bit signal processor allows Onkyo TX-RZ820 to decode Dolby Atmos formats in 5.2.2-channel configuration and DTS:X. DTS Neural:X and Dolby Surround cod...

Despite the fact that both models has 2.0 channel configuration we can’t say that they are similar. The power output of Onkyo almost two times higher than Pioneer’s: 80/8 vs 45/8 W/Ohm. Onkyo TX-8140 is universal in terms of reproducible audio formats. It supports standard low-resolution MP3 audio files and Spoti...

Both devices has 9.2 channels, but here their similarities come to an end. The Marantz has 125W at 8 Ohms, while Yamaha boasts 140/8. Marantz SR7011 supports such current 3D audio formats as Dolby Atmos and DTS:X in 5.1.4-channel configuration, and after a paid software update, another Auro-3D three-dimen...

The compared models have obvious differences. Looking at figures RZ740 has 9.2 channels and 225W at 6 Ohms of power. At the same time his rival owns 7.2 channels and 165/6 power output. The Onkyo TX-RZ740 AV receiver is optimized for operation as part of installed AV systems. This unit has passed the THX certification, whi...

The 7.2-channel model of the AVENTAGE series has the power of 110W (8 Ohms). Its 7.2-channel opponent boasts 90/8 W/Ohm. The RX-A1080 AV receiver is equipped with ESS Saber ES9007S Premier high-performance DACs and supports almost all advanced audio and video processing technologies. Dolby Atmos and D...